Assembler Power Plant B - 91104

Assembler Power Plant B - 91104

Company:

The Boeing Company

Boeing Commercial Airplanes is excited to offer opportunities for an Assembler Power Plant B to become part of our Join and Installation team in Everett and Kent, Washington.

Join our dynamic team as an Assembler Power Plant B, where your skills will be pivotal in constructing and assembling critical aircraft components. In this essential role, you will utilize production drawings and specifications to accurately install, fit, and align parts for power packs and strut assemblies. Your attention to detail will ensure that each component is meticulously drilled, reamed, and riveted, while your expertise in pre-assembly will streamline the process for wiring harnesses and tubing assemblies. You will operate advanced material handling equipment to efficiently load and unload engines and struts. Your ability to verify dimensions and check for defects will be crucial in maintaining our commitment to excellence. If you are passionate about aviation and thrive in a collaborative environment, we invite you to contribute to our mission of delivering high-quality aircraft systems.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Install, fit, fasten, align, adjust, and connect parts and assemblies to build aircraft power packs and strut assemblies.

• Use production drawings, specifications, and assembly pages to derive measurements and locate points for part marking and layout preparation.

• Perform drilling, reaming, riveting, and soldering necessary for assembly tasks.

• Review work orders and installation plans to determine job priorities and obtain appropriate drawings and production illustrations.

• Obtain and verify kitted detail parts and assemblies, ensuring they are correct and free of defects.

• Pre-assemble components such as wiring harnesses and tubing assemblies using power and hand tools.

• Operate material handling equipment, including overhead cranes and scissor lifts, to load and unload engines and struts.

• Align parts and assemblies to mating surfaces, temporarily securing them in place and checking for proper alignment.

• Attach, seal, and connect parts, assemblies, and wires using the correct fasteners and tools, tightening per specifications.

• Torque fasteners and install safety devices such as lock wires and cotter pins as required by drawings or specifications.

• Seal hydraulic fittings and access doors, applying necessary fluids, primers, and adhesives according to specifications.

• Operate various tools, including pull rivet guns and countersinks, to fasten and torque parts and assemblies.

• Verify close tolerance dimensions using precision measuring tools and check work for defects before inspection.

• Maintain personal and tool certifications, ensuring compliance with safety and operational standards.

• Communicate with team leaders and supervisors regarding job progress, issues, and assistance needed, while consulting with engineering and planning as required.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs. to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Do you meet this requirement?

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications:

• 1+ years of experience working with mechanical or structures related statements of work; such as construction, aerospace, automotive, maritime or similar industry; this can include education and military.

• 1+ year experience utilizing and following detailed work instructions, reading and interpreting blueprints, drawings, and specifications.

• Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.

• Ability to lift up to 35 pounds.

• This position requires you to wear eye, hearing, foot, hand, respirator and other personal protective equipment/safety gear at all times.

• Proficiency in reading, writing, and speaking English

Preferred Qualifications:

• 1+ years of experience performing aircraft structural work or equivalate.

• 1+ years of experience using high impact vibratory tools; such as bucking/riveting.

• Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program

Conflict of Interest: 

• Successful candidates for this position must successfully complete the Company’s Conflict of Interest (COI) assessment process.

Typical Education & Experience:

• High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace

• Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

• This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Safety Sensitive Statement:

• This is a safety-sensitive position and is subject to Department of Transportation (DOT) random drug and alcohol testing.

Shift Work Statement:

• This position is for a variety of shifts

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $25.00/hour, with potential to earn up to $55.30/hour in accordance with the terms of the relevant collective bargaining agreement.

Language Requirements:

English

Education:

Not Applicable

Relocation:

Relocation assistance is not a negotiable benefit for this position.

Export Control Requirement:

Safety Sensitive:

Security Clearance:

This position does not require a Security Clearance.

Visa Sponsorship:

Employer will not sponsor applicants for employment visa status.

Contingent Upon Award Program

This position is not contingent upon program award

Shift:

Shift 4 (United States of America)

Stay safe from recruitment fraud! The only way to apply for a position at Boeing is via our Careers website. Learn how to protect yourself from recruitment fraud - Recruitment Fraud Warning